• >

     Contact Us

 

  Film And Foil Corporation Limited
  Tel:   0086-532-86870702
  Fax:  0086-532-86870702
  Skype: safetyevafilm
  Email:  sales@safetyevafilm.com
  Web site: www.qdeverbest.com
  Address: No 196, Linghai Road,

  Qingdao, China

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Home>Lamination Accessory>Heat Resistance Green Tape



The green tape is specially used to perfectly prevent the melt EVA film overflowing through laminated glass edges in the oven when heating (the GREEN TAPE is High temperature resistance).

Here below is the most popular size of the green tape:

20mm*66M/roll

25mm*66M/roll

30mm*66M/roll

35mm*66M/roll

40mm*66M/roll

50mm*66M/roll

Free asked questions:

1) If we use the GREEN TAPE to seal the edges of pre-laminated glass to prevent the exit out of the EVA in the glass laminating oven, will the GREEN TAPE prevent the de-airing vacuuming? do we need to make some holes on the GREEN TAPE for vacuuming the air out?

It depends. If you don’t make holes on the GREEN TAPE, and you make EVA laminated glass successfully without bubbles, then you don’t need to make holes on the GREEN TAPE, so you can get the cleaner result of the edges of the final laminated glass. If you don’t make holes on the GREEN TPAE, but you face bubbles in the corners or edges of the laminated glass, then it’s better you make some holes on the GREEN TAPE to help pre-laminated glass de-airing vacuuming.

2) Does the GREEN TPAE leave glues on the glass?


NO! No remains of GREEN TAPE left on glass surface after peeling off. The GREEN TPAE can stand continuously heating more than 180℃with strong tear resistance.